Skip to content
Free marketing audit: find out what is holding your site back.

Google AdsGuide

Google Ads Bidding Strategies in 2026: Which One to Use, What Changed This Year, and a Script to Check Yours

Google Ads has a bid strategy for each goal: conversions, conversion value, clicks or visibility. Three changes since 2025 make most older guides wrong, and one from August 2026 quietly changed how budget-limited Target CPA and Target ROAS campaigns spend. Here is how to choose, how to switch safely, and a free script that flags the campaigns to review first.

A wooden auction gavel resting on its block on a dark desk

Key takeaways

  • Google Ads bidding strategies fall into four goals: conversions (Target CPA, Maximize conversions), conversion value (Target ROAS, Maximize conversion value), clicks (Maximize clicks, Manual CPC) and visibility (Target impression share).
  • Enhanced CPC stopped working in Search and Display campaigns the week of March 31, 2025; campaigns that were not moved are now effectively on Manual CPC, according to Google Ads Help.
  • Since June 2026, Google Ads labels "Maximize conversions with a Target CPA" as Target CPA and "Maximize conversion value with a Target ROAS" as Target ROAS; Google says the bidding behavior is unchanged.
  • Since Aug. 17, 2026, Target CPA and Target ROAS campaigns that are limited by budget bid toward the target you set instead of beating it, so a campaign with a $10 target that was getting $5 conversions drifts toward $10 unless you lower the target.
  • Our free, read-only Google Ads script lists every enabled campaign with its bid strategy and flags budget-limited campaigns beating their target by 20% or more and manual campaigns with 30 or more conversions a month.

Google Ads bidding strategies tell Google what to aim for in each auction: conversions, conversion value, clicks or visibility. Pick the goal first and the strategy follows. The catch in 2026 is that three changes since early 2025 have made a lot of the advice on page one out of date: Enhanced CPC is gone from Search, Target CPA and Target ROAS got their own names back, and since Aug. 17, 2026, budget-limited campaigns with a target bid toward that target instead of beating it. These changes apply in every country Google Ads runs in.

Below is which strategy fits which goal, according to Google's own help pages (all read on Nov. 19, 2026), what changed, how to switch without wrecking a campaign, and a free script that tells you which of your campaigns to look at first.

What are the bidding strategies in Google Ads?

Google's bid strategy guide groups them by goal. For Search, Shopping and Performance Max, the ones that matter are:

Your goalStrategyWhat it does
Leads or sales at a set costTarget CPAGets as many conversions as possible at your average cost per conversion
Leads or sales, spend the budgetMaximize conversionsSpends your full budget to get the most conversions
Revenue at a set returnTarget ROASGets as much conversion value as possible at your return on ad spend
Revenue, spend the budgetMaximize conversion valueSpends your full budget to get the most conversion value
Website visitsMaximize clicksGets as many clicks as possible within your budget
Control over each bidManual CPCYou set the maximum cost per click for each ad group or keyword
Being seenTarget impression shareBids to show your ad at the absolute top, the top or anywhere on the results page, a set share of the time

The first four are Smart Bidding, which Google's Smart Bidding page describes as bidding that uses Google AI to set a bid for every auction, using signals such as device, location, time of day, remarketing lists, language and operating system. All four need conversion tracking. The value-based two also need conversions that carry a value, such as order revenue.

Display and video campaigns have their own options (viewable CPM, target CPM, cost per view), and Demand Gen adds Target CPC. This guide sticks to the search side.

What changed in Google Ads bidding in 2025 and 2026?

Three changes, all from Google's help pages:

  • Enhanced CPC is gone from Search and Display. Google's automated bidding page says ECPC stopped being available for Search and Display campaigns the week of March 31, 2025, and campaigns that weren't moved "are now effectively using Manual CPC". If an old campaign still says it uses Enhanced CPC in a report, treat it as manual.
  • Target CPA and Target ROAS have standalone names again. Since June 2026, Google Ads shows "Maximize conversions with a Target CPA" as Target CPA and "Maximize conversion value with a Target ROAS" as Target ROAS (Google's note). Google says it's a label change only and that Google Ads Editor, the API and the mobile app may show the old names for a while.
  • Budget-limited campaigns now bid to their target. Starting Aug. 17, 2026, and fully rolled out by Aug. 27, Target CPA and Target ROAS campaigns marked "Limited by budget" aim for the target you set instead of beating it (Google's page). Google's own example: a campaign with a $10 Target CPA that was getting $5 conversions "now delivers more closely to a $10 USD actual CPA." It covers Search, Shopping, Performance Max, Demand Gen and Travel campaigns, plus Target CPC in Demand Gen. Campaigns that aren't limited by budget, Manual CPC and Target impression share are not affected.

The third change is the one that costs money quietly. Google says plainly that it "won't automatically adjust your bidding targets or budgets." A target you set loosely two years ago, on a campaign that has been limited by budget ever since, is now an instruction the system follows.

Target CPA vs Maximize conversions: which should you use?

Both aim for conversions. The difference is what you fix.

  • Maximize conversions fixes the budget. Google's help page says it will try to spend your full average daily budget, so a campaign spending well under its budget today could spend much more after you switch. Use it when the budget is the hard limit and your cost per lead can move.
  • Target CPA fixes the cost per conversion. Google says some conversions will cost more and some less, but the average aims at your target. Google's Target CPA page also recommends being comfortable spending up to twice your average daily budget on a given day, within the monthly limit. Use it when you know what a lead or sale is worth to you.

The same split applies to Target ROAS vs Maximize conversion value for revenue.

Our view: if you know your break-even cost per lead or return on ad spend, use a target. It is the only setting that says what a conversion is worth to your business, and since the August change, the system takes it at face value. Use the Maximize strategies when you don't know that number yet, or when the budget truly can't move. Don't use Maximize clicks for a lead generation campaign that already tracks conversions: clicks are not the goal, and the strategy doesn't know which clicks turn into customers.

How much conversion data do you need for Smart Bidding?

Less than many guides say, but enough to judge the result. Google's Target CPA page says advertisers "can start using Target CPA with no conversion history". What Google does set is a bar for evaluating results: periods with at least 30 conversions, such as a month or longer, and 50 conversions for Target ROAS (Smart Bidding page).

Two harder limits to know:

  • Demand Gen with Maximize conversion value is only offered once you have at least 50 Demand Gen conversions with value in the past 35 days (including 10 in the past 7 days), or 100 across all Demand Gen campaigns in 35 days (Google's page).
  • Recommended targets aren't calculated for campaigns with fewer than 7 conversions, Google's FAQ on the August change says.

Our rule of thumb: a campaign with fewer than 30 conversions a month can still use Maximize conversions, but don't judge it, or tighten its target, on a week of data.

How to change your bid strategy in Google Ads

From Google's Change how you bid page:

  1. Go to Campaigns in the Campaigns menu and select the campaign.
  2. Select Settings in the page menu for that campaign.
  3. Open Bidding, then select Change bid strategy.
  4. Choose the new strategy from the drop-down and enter a target if it has one.
  5. Select Save, or Save as experiment to test the new strategy against the current one before committing.

We'd use Save as experiment for any campaign that brings in leads or sales you can't afford to lose, and a straight switch for small or new campaigns.

What happens after you switch: the bid strategy status shows Learning (find it under Tools, then Bid strategies, in the Status column). Google's status page says Learning "never lasts more than 7 days" and appears after a new strategy, a change in the campaigns or keywords it covers, or a big change in conversion goals. Changing a budget or a target doesn't reset the learning or wipe history. That's worth knowing: you can adjust a target the same day without "starting over". Google's FAQ suggests waiting one to two conversion cycles before judging the result.

A script to check every campaign's bid strategy

This read-only Google Ads script lists each enabled campaign with its bid strategy and last 30 days of results, and marks the ones to review first:

  • REVIEW: limited by budget, with a Target CPA or Target ROAS that its actual results beat by 20% or more. These are the campaigns the August change pulls toward a worse result unless you tighten the target.
  • TEST: still on Manual CPC (or the retired Enhanced CPC) with 30 or more conversions in 30 days, enough to try Target CPA or Maximize conversions as an experiment.
  • WAIT: has a target but fewer than 30 conversions, too few to judge.
  • CHECK: uses a portfolio strategy, whose target Google says you have to adjust at the portfolio level.
bid-strategy-check.js
// Bid strategy check: what each enabled campaign bids with, how it did over
// the last 30 days, and which ones to look at first. Read-only: changes nothing.
// Paste into Google Ads > Tools > Bulk actions > Scripts, then click Preview.
const MIN_CONVERSIONS = 30; // Google suggests judging over periods with at least 30 conversions
const GAP = 0.2;            // our threshold: flag when actual beats the target by 20% or more
 
function money(micros) { return (Number(micros) / 1e6).toFixed(2); }
 
function target(c) {
  const k = c.campaign;
  const t = k.biddingStrategyType;
  if (t === 'TARGET_CPA') return { cpa: Number((k.targetCpa || {}).targetCpaMicros || 0) };
  if (t === 'MAXIMIZE_CONVERSIONS') return { cpa: Number((k.maximizeConversions || {}).targetCpaMicros || 0) };
  if (t === 'TARGET_ROAS') return { roas: Number((k.targetRoas || {}).targetRoas || 0) };
  if (t === 'MAXIMIZE_CONVERSION_VALUE') return { roas: Number((k.maximizeConversionValue || {}).targetRoas || 0) };
  return {};
}
 
function check(c) {
  const k = c.campaign, m = c.metrics;
  const t = k.biddingStrategyType;
  const cost = Number(m.costMicros || 0);
  const conv = Number(m.conversions || 0);
  const value = Number(m.conversionsValue || 0);
  const reasons = k.primaryStatusReasons || [];
  const limited = reasons.indexOf('BUDGET_CONSTRAINED') !== -1;
  const tg = target(c);
 
  if (t === 'ENHANCED_CPC' || t === 'MANUAL_CPC') {
    return conv >= MIN_CONVERSIONS
      ? 'TEST: ' + Math.round(conv) + ' conversions on manual bids; try Target CPA or Maximize conversions as an experiment'
      : 'OK: manual bids, too few conversions to switch yet';
  }
  if (k.biddingStrategy) return 'CHECK: portfolio strategy; review its target on the Bid strategies page';
  if (tg.cpa > 0) {
    if (conv < MIN_CONVERSIONS) return 'WAIT: under ' + MIN_CONVERSIONS + ' conversions, too few to judge';
    const actual = cost / conv;
    const line = 'target CPA ' + money(tg.cpa) + ', actual ' + money(actual);
    if (limited && actual <= tg.cpa * (1 - GAP)) return 'REVIEW: limited by budget and beating its ' + line;
    return 'OK: ' + line;
  }
  if (tg.roas > 0) {
    if (conv < MIN_CONVERSIONS) return 'WAIT: under ' + MIN_CONVERSIONS + ' conversions, too few to judge';
    const actual = cost > 0 ? value / (cost / 1e6) : 0;
    const line = 'target ROAS ' + Math.round(tg.roas * 100) + '%, actual ' + Math.round(actual * 100) + '%';
    if (limited && actual >= tg.roas * (1 + GAP)) return 'REVIEW: limited by budget and beating its ' + line;
    return 'OK: ' + line;
  }
  if (t === 'MAXIMIZE_CONVERSIONS' || t === 'MAXIMIZE_CONVERSION_VALUE') {
    return 'OK: no target, spends the full budget' + (conv > 0 ? ' (actual CPA ' + money(cost / conv) + ')' : '');
  }
  return 'OK: ' + (t === 'TARGET_SPEND' ? 'Maximize clicks' : t);
}
 
function main() {
  const rows = AdsApp.search(
    'SELECT campaign.name, campaign.advertising_channel_type, campaign.bidding_strategy_type, ' +
    'campaign.bidding_strategy, campaign.primary_status_reasons, ' +
    'campaign.target_cpa.target_cpa_micros, campaign.maximize_conversions.target_cpa_micros, ' +
    'campaign.target_roas.target_roas, campaign.maximize_conversion_value.target_roas, ' +
    'metrics.cost_micros, metrics.conversions, metrics.conversions_value ' +
    "FROM campaign WHERE campaign.status = 'ENABLED' AND segments.date DURING LAST_30_DAYS");
  while (rows.hasNext()) {
    const c = rows.next();
    Logger.log(c.campaign.name + ' | ' + c.campaign.advertisingChannelType + ' | ' +
      c.campaign.biddingStrategyType + ' | ' + check(c));
  }
}

Paste it into Tools, Bulk actions, Scripts, click Preview and read the log. For a REVIEW line, Google's own options are to lower the CPA target (or raise the ROAS target) to match recent results, set a target that fits your margins, switch to the matching Maximize strategy, or raise the budget. Our view: if you were happy with the results before August, set the target to what the campaign actually achieved; Google's FAQ says matching recent performance shouldn't cause noticeable swings. The 20% gap is our own threshold for what is worth a look; lower it if your margins are thin.

Google's API names Maximize clicks TARGET_SPEND, and a standard (not portfolio) Target CPA can show up as MAXIMIZE_CONVERSIONS with a target set, depending on how the campaign was created. The script reads both.

How we tested it: we don't have a live Google Ads account to run it on. We checked every field and value against Google's Google Ads API campaign reference (v26), including campaign.primary_status_reasons, whose values include BUDGET_CONSTRAINED, and campaign.bidding_strategy_type, whose values include ENHANCED_CPC, TARGET_SPEND and TARGET_IMPRESSION_SHARE. Then we ran it in Node.js against a stand-in for AdsApp and Logger with nine made-up campaigns. It flagged a budget-limited campaign with a $40 target and a $25 actual CPA as REVIEW and left the same numbers alone on a campaign that wasn't limited by budget; flagged a value campaign with a 400% target and a 520% actual return; passed a campaign at $29.03 against a $30 target; marked a Manual CPC campaign with 45 conversions as TEST, a campaign with 12 conversions as WAIT and a portfolio campaign as CHECK.

What we don't know

  • How many campaigns the August change hit. Google hasn't published a count, and the mandatory notice it sent, its FAQ says, looked at a longer period than the recommendations in accounts.
  • Whether every account shows the new names yet. Google says Editor, the API and the mobile app will catch up later; the old names still work the same way.
  • How your campaigns respond. The script reads your settings and your last 30 days; it can't predict what a new target will do. That is what Save as experiment is for.

For the rest of an account review, see our guides to Quality Score, auction insights and negative keywords. Running a holiday sale? Our seasonality adjustments post covers telling Smart Bidding about Black Friday. Microsoft Advertising made its own biggest bidding change in a decade this week.

Sources

Photo of Kiran Dasgupta

About the author

Kiran Dasgupta, Editor

Kiran runs Kihan Marketing, a web design, SEO and ads agency, and manages dozens of websites across real estate, home services and healthcare. He writes about SEO, AI search and paid ads news, and what it means for the people who run websites.