Google Ads Quality Score: What It Measures, Where to Find It, and a Script That Shows Which Keywords to Fix First
Quality Score rates each keyword from 1 to 10 on three parts: expected clickthrough rate, ad relevance and landing page experience. Google now says plainly that it is a diagnostic, not an input in the ad auction. Here is how to read it, what to change for each part, and a free Google Ads script that ranks the weak keywords by spend.
Google Ads Quality Score rates each Search keyword from 1 to 10, based on expected clickthrough rate, ad relevance and landing page experience compared with other advertisers on the exact same search over the last 90 days.
Google's help page says Quality Score is not an input in the ad auction and should not be optimized or aggregated; the auction uses ad quality measured at the moment of each search.
A dash in the Quality Score column instead of a number means there are not yet enough searches that exactly match the keyword, and changing match types does not change the score.
Each part has its own fix: ad text for expected clickthrough rate, tighter ad groups for ad relevance, and the right, fast, mobile-friendly page for landing page experience.
Our free Google Ads script lists every keyword with a "Below average" part, sorted by cost over the last 30 days, so the money at stake decides what to fix first.
Google Ads Quality Score is a 1 to 10 rating for each keyword in a Search campaign that tells you how your ads and landing page compare with other advertisers' for the same search. It is built from three parts: expected clickthrough rate, ad relevance and landing page experience. Google's help page now puts it bluntly: Quality Score "is not an input in the ad auction"; it's a diagnostic tool. It works the same way in every country Google Ads runs in.
That changes how you should use it. Below is what each part measures, where to find the numbers, what to change when a part is weak, and a free Google Ads script that lists the weak keywords in order of how much you spend on them.
What is Quality Score in Google Ads?
Google scores each keyword on three parts, and each part gets one of three ratings: "Above average", "Average" or "Below average". The comparison is with other advertisers whose ads showed for the exact same search over the last 90 days.
Expected clickthrough rate (Exp. CTR): how likely your ad is to be clicked when it shows.
Ad relevance: how closely your ad matches the intent behind the search.
Landing page experience: how relevant and useful your landing page is to people who click.
The 1 to 10 score combines the three. Google doesn't publish the formula.
Does Quality Score affect what you pay per click?
Not directly. Google's help page says Quality Score is not an auction input. What the auction uses is Ad Rank, which Google's Ad Rank page says is built from your bid, the quality of your ads and landing page at that moment, Ad Rank thresholds, the competitiveness of the auction, the context of the search, and the expected impact of your assets and other ad formats. Quality Score is Google's summary of that ad quality, calculated from past exact searches.
Our view: treat Quality Score like a warning light on a dashboard. A "Below average" part points to something that is probably also hurting you in real auctions. But raising the number is not the goal, and Google says Quality Score "should not be optimized or aggregated with the rest of your data". That rules out the account-wide "weighted Quality Score" many reports use as a headline metric.
What is a good Quality Score in Google Ads?
Google doesn't name a target. A higher score means your ad and page are more useful than competitors' for that search, so 7 or more with no "Below average" parts is a sound place to be. The parts matter more than the number: a 6 with a "Below average" landing page tells you exactly what to fix, and a 9 on a keyword that never converts is still a bad keyword.
Look at Quality Score next to clickthrough rate, conversion rate and cost per conversion. Google's own advice is to use it as a filter: find good keywords that could do better, and spot patterns, such as every keyword that lands on one slow page.
How to check your Quality Score
Google's steps, as of November 2026:
In your Google Ads account, open Campaigns, then Keywords.
Click the columns icon in the upper right corner of the table.
Under "Modify columns for keywords", open All columns, then the Quality score section.
Add Quality Score, Landing Page Exp., Exp. CTR and Ad Relevance.
For past values over the date range you are viewing, also add the "(hist.)" versions, and segment the table by day to see daily changes.
Click Apply.
Why does Quality Score show a dash instead of a number?
A dash means there aren't enough searches that exactly match your keyword to calculate a score. Google says this is about volume, not a problem with the keyword. Two notes from Google's help page:
Match types don't change the score. Quality Score is based on exact searches of the keyword, so switching from phrase to exact doesn't raise it. Broadening the match type can help a keyword enter more auctions and collect enough data.
A broad match keyword can borrow a score. If the same ad group has an exact match version of the keyword with impressions in the last 90 days, both show the same Quality Score.
Make the offer clearer and more specific, and highlight a real benefit such as free shipping.
Match the ad's details to the intent of the keyword.
Try different calls to action that connect to the landing page.
Google's caveat: a more specific ad can get fewer clicks but more sales. Judge by your goal, not by CTR alone.
Ad relevance is "Below average":
Use the language searchers use in the ad text.
Split ad groups that hold many unrelated keywords, so each ad covers one theme. Google's example: a jeweler separates "engagement rings" from "wedding bands".
Moving the same ads and keywords to another campaign or account doesn't change ad quality, Google says. Only real changes count.
Landing page experience is "Below average":
Send the click to the page that delivers what the ad promised. A search for flannel shirts should land on flannel shirts.
Keep the offer and wording consistent from ad to page.
Make the page work well on mobile and load fast.
The page doesn't need to repeat the search word for word, Google says.
Our tip: start with the landing page, because one page often serves many keywords, so one fix lifts several scores at once. Also clean up wasted searches with negative keywords, since irrelevant matches bring your clickthrough rate down.
A script that shows which keywords to fix first
The keyword table shows Quality Score, but not which weak keywords cost you the most. This Google Ads script does. It lists every active keyword with at least one "Below average" part, sorted by cost over the last 30 days, with the part to fix and Google's suggestion. It only reads your account and changes nothing.
To run it: in Google Ads, open Tools, then Bulk actions, then Scripts, click +, choose New script, paste the code, click Authorize, then Preview. The results appear under Logs. To get the full list in a Google Sheet, paste the sheet's URL into SHEET_URL first.
quality-score-check.js
// Quality Score check: keywords where a part of Quality Score is "Below average",// most expensive first, with what Google suggests fixing.// Paste into Google Ads > Tools > Bulk actions > Scripts. Read-only: changes nothing.const SHEET_URL = ''; // optional: paste a Google Sheet URL to write the list thereconst PERIOD = 'LAST_30_DAYS';const PARTS = { searchPredictedCtr: ['Exp. CTR', 'Rewrite the ad text: a clearer offer, a specific benefit, a call to action that matches the landing page.'], creativeQualityScore: ['Ad relevance', 'Use the searcher\'s words in the ad, or split the ad group so each ad covers one theme.'], postClickQualityScore: ['Landing page exp.', 'Send the click to the page that answers it; check speed and how it works on mobile.'],};function main() { const rows = AdsApp.search( 'SELECT campaign.name, ad_group.name, ad_group_criterion.keyword.text, ' + 'ad_group_criterion.keyword.match_type, ad_group_criterion.quality_info.quality_score, ' + 'ad_group_criterion.quality_info.search_predicted_ctr, ' + 'ad_group_criterion.quality_info.creative_quality_score, ' + 'ad_group_criterion.quality_info.post_click_quality_score, ' + 'metrics.cost_micros, metrics.clicks, metrics.impressions ' + 'FROM keyword_view ' + 'WHERE segments.date DURING ' + PERIOD + ' ' + "AND campaign.status = 'ENABLED' AND ad_group.status = 'ENABLED' " + "AND ad_group_criterion.status = 'ENABLED' AND metrics.impressions > 0"); const flagged = []; let total = 0, noScore = 0; const below = { searchPredictedCtr: 0, creativeQualityScore: 0, postClickQualityScore: 0 }; while (rows.hasNext()) { const r = rows.next(); const q = r.adGroupCriterion.qualityInfo || {}; total++; if (!q.qualityScore) noScore++; const weak = Object.keys(PARTS).filter(k => q[k] === 'BELOW_AVERAGE'); weak.forEach(k => below[k]++); if (weak.length) { flagged.push({ cost: Number(r.metrics.costMicros || 0) / 1e6, clicks: Number(r.metrics.clicks || 0), keyword: r.adGroupCriterion.keyword.text, match: r.adGroupCriterion.keyword.matchType, qs: q.qualityScore || '-', campaign: r.campaign.name, adGroup: r.adGroup.name, weak: weak.map(k => PARTS[k][0]).join(', '), fix: weak.map(k => PARTS[k][1]).join(' '), }); } } flagged.sort((a, b) => b.cost - a.cost); Logger.log(total + ' keywords with impressions (' + PERIOD + '). ' + noScore + ' have no Quality Score yet ("-").'); Object.keys(below).forEach(k => Logger.log('Below average ' + PARTS[k][0] + ': ' + below[k])); flagged.slice(0, 25).forEach(f => Logger.log( f.cost.toFixed(2) + ' | ' + f.keyword + ' [' + f.match + '] | QS ' + f.qs + ' | ' + f.weak + ' | ' + f.campaign + ' > ' + f.adGroup)); if (SHEET_URL) { const sheet = SpreadsheetApp.openByUrl(SHEET_URL).getSheets()[0]; sheet.clearContents(); const out = [['Cost', 'Clicks', 'Keyword', 'Match', 'Quality Score', 'Below average', 'Campaign', 'Ad group', 'What to try']] .concat(flagged.map(f => [f.cost, f.clicks, f.keyword, f.match, f.qs, f.weak, f.campaign, f.adGroup, f.fix])); sheet.getRange(1, 1, out.length, out[0].length).setValues(out); Logger.log('Wrote ' + flagged.length + ' rows to the sheet.'); }}
Costs are in your account's currency. In the API, Google calls the three parts search_predicted_ctr (Exp. CTR), creative_quality_score (ad relevance) and post_click_quality_score (landing page experience).
How we tested it: we don't have a live Google Ads account to run it on, so we checked every field in the query against Google's current API reference (version 26), where each field exists and can be selected with keyword_view. Then we ran the script in Node.js against a stand-in for Google's AdsApp, Logger and SpreadsheetApp, fed with four made-up keywords: one weak on two parts, one weak on ad relevance only, one healthy, and one with no score. It flagged the two weak keywords in cost order, counted the keyword without a score, and wrote a sheet with a header and two rows of equal width. If you run it on a real account, use Preview first; it makes no changes either way.
What we don't know
How Google combines the three parts into the 1 to 10 number. It doesn't say.
How fast a fix shows up. Quality Score looks back over 90 days of exact searches, so expect changes to appear gradually rather than the next day.
How much a "Below average" part costs you in a given auction. Ad Rank uses quality measured at auction time, which you can't see. For a view of who you compete with in those auctions, see our guide to Google Ads auction insights.
Kiran runs Kihan Marketing, a web design, SEO and ads agency, and manages dozens of websites across real estate, home services and healthcare. He writes about SEO, AI search and paid ads news, and what it means for the people who run websites.